FI Sales is pleased to offer quality-engineered x-ray film processors from Protec.  FI Sales is the exclusive sales representative for Protec in the USA and Canada, stocking and distributing Protec processors to private practices through local x-ray dealers, catalogers, and internet resellers.

FI Sales is pleased to reintroduce the Level 356.  This compact x-ray film processor is designed primarily to handle ALL sizes of dental films from the smallest intraoral to panoramic and cephalometric films.  The Level 356 will accept up to a 35 cm (14 inch) wide film of any length, so it can also be used in low film volume medical, veterinary, podiatric, and chiropractic practices. 

Protec ECOMAX X-Ray Film Processor

The ECOMAX is a 100 second heated processor with tanks, automatic Run/Standby modes, automatic replenishment, and special automatic anti-oxidation/anti-crystallization cycles. 

• Click HERE for a closer, detailed look at the ECOMAX. 
• Click HERE for ECOMAX literature with complete specifications. 
• Click HERE to view the ECOMAX video on YouTube.
• Click HERE to view the ECOMAX video on this site. 
• Click HERE for an ECOMAX operating manual.
• Click HERE to view the ECOMAX board connections.
• Click HERE to view some ECOMAX installation tips. 
• The ECOMAX is now available with our No Plumbing Kit.
  • Click HERE to watch the ECOMAX No Plumbing Kit video on YouTube.
  • Click HERE to watch the ECOMAX No Plumbing Kit video on this site.
  • Click HERE for written instructions for the ECOMAX No Plumbing Kit.

ECOMAX for dental films!!!

• Click HERE to watch the ECOMAX dental film video on YouTube.
• Click HERE to watch the ECOMAX dental film video on this site. 
• And if you have a sink or utility tub with a water supply, but don't have a floor drain, choose our Porta Sump 4 to go along with your processor purchase. 
  • Click HERE for Porta Sump 4 literature.
  • Click HERE to watch the Porta Sump 4 video on YouTube.
  • Click HERE to watch the Porta Sump 4 video on this site.
  • Click HERE for written instructions for the Porta Sump 4.

The ECOMAX is the most cost effective x-ray film processor available in North America.  Nobody can beat the ECOMAX price.  Not Konica, AGFA, Hope, All-Pro, Alphatek, AFP, or JPI.  Nobody!  The clever features built into the ECOMAX help save your practice on electricity, chemicals, and water during operation.  Select the ECOMAX for savings when purchasing and when using a processor. 

"I installed my first Ecomax film processor today and I am very excited about it.  It is a very easy install, simple operation and pleasing to the eye.  In all the years I have worked with film processors, I think this one is the best buy for low volume clinics.  I am looking forward to selling many more."                                       Don Isaacs, Express X-Ray, Ft. Worth, TX

The ECOMAX can be shipped via truck (preferred) or UPS Ground.  FREE liftgate service is provided with all truck shipments! 

Warranty:  2 Years Parts                                      Current Leadtime:  ECOMAX is IN STOCK. 

For Export - Specify the FI-45

Click HERE for FI-45 Specifications

Protec OPTIMAX X-Ray Film Processor

 The OPTIMAX is a 90 second heated processor with tanks, automatic Run/Standby modes, automatic replenishment, and front panel adjustable heat control.  Private practices in the USA and Canada have been enjoying the quality of OPTIMAX processors since 2000.  From 2000 through 2006, the OPTIMAX was sold successfully in the USA and Canada as the Summit QCP. 

• Click HERE for a closer, detailed look at the OPTIMAX. 
• Click HERE for OPTIMAX literature with complete specifications. 
• Click HERE for an OPTIMAX operating manual.
• The OPTIMAX is now available with our No Plumbing Kit.  Click HERE for written instructions for the No Plumbing Kit for the OPTIMAX.

The OPTIMAX can be shipped via truck (preferred) or UPS Ground.  FREE liftgate service is provided on all truck shipments!

Warranty:  2 Years Parts                                      Current Leadtime:  OPTIMAX is IN STOCK. 

For Export - Specify the FI-75

Click HERE for FI-75 Specifications

If a variable speed version is required, then specify the    FI-VS.

Click HERE for FI-VS Specifications

To satisfy the higher film processing volume needs of our export customers, specify the FI-245.

Click HERE for FI-245 Specifications. 

X-Ray Film Processor Stands

Although the Fischer and Protec brand processors are tabletop processors, FI Sales also offers a variety of stands to fit the Protec ECOMAX and OPTIMAX x-ray film processors, as well as Fischer processors.  The Deluxe Protec Stand is designated by KB92E23-DP.  The KB92E23-DP will fit the ECOMAX, OPTIMAX, and Summit QCP.  The Deluxe Protec Stand has undergone a redesign to help reduce cost and make it lighter for shipping and handling while maintaining high quality standards.  The new design easily contains the 2 replenishment containers underneath and has soft bottom leveling feet.  The new list price for the redesigned Deluxe Protec Stand is $180.  The new Deluxe Protec Stand is shown below.

Also available is the KB92E23-BP Basic Protec Stand.  It is our lowest cost stand.  The Basic Protec Stand can hold the ECOMAX, OPTIMAX, and Summit QCP on its 20" X 28" tabletop.  The list price for the Basic Protec Stand is $120.  The KB92E23-BP Basic Protec stand is shown below.

It can be assembled in 2 ways.  The version on the left is shown with the top shelf at a height of 32".  The replenishment tanks can fit nicely underneath the lower shelf which can be used for storage.  The version on the right is shown with a top shelf at a height of 29", and the leg extensions in the corners will keep the ECOMAX securely on the stand if the processor is in a high traffic area.  Either way, the KB92E23-BP is an economical way to hold your Protec processor.  Shipping size is 29" X 22" X 7" with a weight of 28 lbs.   

The KB92E23-WT also looks like the KB92E23-BP but with an 18" X 24" tabletop to accept ONLY the Fischer brand processors.

And when you get rid of your old AFP Mini-Med for a new Protec Ecomax, save your old AFP stand.  It will work with the Protec Ecomax.  Simply remove the plastic portion from the feet of the Ecomax, and the remainder of the feet will fit in the retention cups of the AFP Mini-Med stand.

Newly developed by FI Sales is the EcoTank, designed for the low film volume veterinary practice.  Fully automatic x-ray film processors that run all day long waste chemicals, water and electricity in a practice that only develops a few films each day.  The EcoTank is the answer.  Using technology patented by FI Sales owner Jim Flanigan when developing the Fischer AutoTank, the EcoTank is an  x-ray film processor designed to be Economical and Ecological.

The EcoTank looks almost identical to the Protec ECOMAX since it utitlizes all ECOMAX parts.

For detailed product literature on the EcoTank, click HERE.For a further explanation as to how and why the EcoTank works, please click HERE for an EcoTank Introduction and FAQ.

Click HERE for the EcoTank Quick Start Instructions.

Here's our July EcoTank special as advertised in DVM Newsmagazine.

More About Protec     

Protec was founded in 1984 and has become a world leader in the manufacture of x-ray film processors and digital imaging solutions.  FI Sales is proud to be able to bring the quality of Protec x-ray film processors to the USA and Canada.  Click HERE for more information about Protec.

Click HERE for the latest newsletter from Protec.

Protec just moved to a larger facility which is shown below in Oberstenfeld near Stuttgart in South-West Germany, and the beautiful surrounding countryside shown below the headquarters. 

Now that you are interested in Protec x-ray film processors, we look forward to hearing from you.  Click HERE to contact FI Sales.

Level 356 Processor

The Level 356 x-ray film processor is once again available for sale, stocked in 110V style in the Midwest.  220V models for international sales will be shipped directly to you from the factory in Japan.  This processor is completely self-contained, requiring no plumbing hook-ups whatsoever.  Offered with a Daylight Loader top as the Level 356 MD, this version shown below allows processing without a darkroom.   

The Level 356 MD-D shown below is ideal for processing within a darkroom.

The Level 356 can handle any size film from 30 X 30 mm to 356 mm wide X any length.  Click HERE for Level 356 literature with complete specifications. 

Now Available for Export!

FI-45  Specs
 

FI-75  Specs

FI-245  Specs 

 

Available in 230V or 115V, 50 or 60Hz.

NOTE:  The FI brand of processors is not available for export to the following countries:

• Brazil
• China
• Mexico
• Peru
• Turkey
• Venezuela